Marble Polishing & Sealing in Toronto
Marble polishing Toronto starts with telling the difference between a surface that needs polishing and one that just needs sealing — they’re not the same job. Send a photo and we’ll tell you honestly which one yours needs.
Or call +1 (647) 871-4085
Marble Polishing Toronto Services
Marble dulls with time even when nothing is actually broken. Foot traffic wears down the polish on a floor, hard water leaves a hazy film on a vanity top, and a splash of wine or lemon juice can etch a dull spot into a countertop in seconds. None of that means the stone is damaged — it usually means it needs polishing, honing, or a fresh seal.
Uni-Stone polishes, hones, and seals marble countertops, floors, vanities, and walls across Toronto and the GTA. If your marble has a chip, crack, or broken edge instead, that’s a different repair — see our marble chip & crack repair service, or our full marble restoration page if you’re not sure which one applies.
Why Send Us a Photo First
- ✓No guesswork — we assess before we quote
- ✓We’ll tell you if you only need sealing, not a full repolish
- ✓Real fabrication background, not just surface work
- ✓WSIB compliant and insured
What We Address
The most common marble finish problems we assess and treat in Toronto and the GTA.
Dull & Hazy Finish
Worn traffic patterns and hard-water film are honed and repolished back to an even sheen.
Common on floors and around sinks — usually a finish problem, not a damage problem.
Etch Marks
Acidic spills — wine, citrus, vinegar — leave dull spots where they touch the stone.
Light etching often polishes out; deeper etching may need honing first.
Water Spots & Rings
Mineral deposits and standing-water marks are lifted and the surface is refinished.
Recurring rings usually mean the sealer has worn through.
Uneven Sheen
Patchy gloss across one surface, often from spot-cleaning or a partial prior polish.
Corrected by re-honing the whole surface evenly, not just the dull patch.
Worn or Failed Sealer
A sealer that’s stopped beading water leaves the stone open to staining.
See our note on when resealing is actually worth it below.
Scratches & Swirl Marks
Fine surface scratches from cleaning tools or grit are honed out before repolishing.
Deeper scratches may need more material removed to fully disappear.
Real Restoration Work by Uni-Stone
This short video shows a real Uni-Stone marble edge repair and polishing project — the same honing and polishing skill we bring to a finish-only job like this one, just applied alongside an edge repair on this particular project.
Stone Surfaces We Work With
Uni-Stone works with marble and natural-stone countertops, islands, floors and vanities throughout Toronto and the GTA. These photos show our general workmanship — not a specific polishing or sealing result.
Does Your Marble Need Polishing, or Just Sealing?
Polishing and sealing solve different problems, and paying for one when you need the other is a waste of money. In general:
- •Polishing is mechanical — it removes light scratches, etching, and dullness and restores shine
- •Sealing is protective — it doesn’t restore shine or remove damage, it just helps resist future stains
- •A newly polished surface still needs sealing afterward to protect the fresh finish
- •A sealer alone won’t fix a surface that’s already dull, etched, or scratched
- •Wet-area floors (like shower floors) often do better honed to a matte finish than high-gloss polished
We can’t tell from a description alone whether a surface needs polishing, sealing, or both — a photo tells us which.
Our Marble Polishing & Sealing Process
The same general process for every job — how much of it you need depends on the surface’s condition.
Send Photos
Send close-up and full-area photos of the surface by WhatsApp or through our contact form.
Assess the Finish
We review the photos to tell whether the surface needs honing, polishing, resealing, or some combination.
Hone & Polish
Scratches, etching, and dullness are worked out and the surface is brought back to an even finish.
Seal & Finish
A protective sealer is applied once the surface is fully restored, and we’ll tell you how to care for it going forward.
Insured, Trained & Compliant
The same credentials on every Uni-Stone project. Our mobile team serves Toronto, Vaughan, Richmond Hill, and the entire GTA.
Marble Polishing & Sealing FAQ
What's the actual difference between polishing and sealing?
Can polishing remove etch marks from wine, vinegar, or lemon juice?
How do I know if my marble needs resealing?
Will a high-gloss polish make my marble floor slippery?
Do you polish and seal countertops, floors, and vanities?
Get a Free Marble Polishing & Sealing Assessment
Send a photo of the surface and we’ll tell you honestly whether it needs polishing, sealing, or both. WSIB compliant, insured, 20+ years of hands-on experience.
Or call +1 (647) 871-4085
